Question 1

What is epoxy flooring?

Accepted Answer

Epoxy flooring is a high-performance surface coating made from a two-part chemical system, an epoxy resin and a polyamine hardener. When mixed, they chemically bond to concrete, creating a seamlessly hard, durable, and chemical-resistant surface that can last decades.

Question 2

Is epoxy flooring safe?

Accepted Answer

Yes. Once fully cured (typically 24 to 72 hours), epoxy flooring is completely safe, non-toxic, and VOC-free. During installation we ensure proper ventilation. The finished surface is food-safe and meets health code requirements.

Question 3

What does '100% solids epoxy' mean?

Accepted Answer

100% solids epoxy contains no solvents or water that evaporate during curing. This means every drop applied stays on your floor, resulting in a thicker, harder, and more durable coating compared to water-based or solvent-based products.

Question 4

Is epoxy flooring slippery?

Accepted Answer

Standard high-gloss epoxy can be slippery when wet. That's why we add anti-slip aggregate (aluminum oxide or silica) to every install, giving you a safe, textured surface without sacrificing the beautiful finish.

Question 5

Can epoxy be applied over existing flooring?

Accepted Answer

Epoxy bonds best to bare concrete. We remove existing coatings, tiles, or paint during surface preparation. Applying over existing flooring can cause adhesion failure, which is why proper prep is non-negotiable for us.

Question 6

What colors are available for epoxy floors?

Accepted Answer

We offer virtually unlimited color options, solid colors, multi-color flake blends, metallic pigments, quartz blends, and custom color-matching. We can even embed logos, patterns, or safety markings into your floor.

Question 7

Does epoxy flooring have an odor?

Accepted Answer

During installation, some epoxy systems have a mild chemical odor. We use low-VOC and VOC-free systems whenever possible and ensure proper ventilation. Once cured, there is zero odor.

Question 8

How thick is an epoxy floor coating?

Accepted Answer

Our residential systems are typically 12 to 20 mils thick. Commercial systems range 20 to 40 mils. Industrial systems can be 40 to 125+ mils depending on traffic and chemical exposure requirements.

Question 9

Can epoxy floors be repaired?

Accepted Answer

Yes. Chips, scratches, or damaged areas can be spot-repaired without redoing the entire floor. We color-match and blend the repair seamlessly. For heavy damage, a full recoat may be more cost-effective.

Question 10

Is epoxy flooring waterproof?

Accepted Answer

Yes. Cured epoxy creates a seamless, non-porous barrier that is fully waterproof. This makes it ideal for garages, patios, commercial kitchens, and any area prone to moisture or spills.

Question 11

Can I apply epoxy myself (DIY)?

Accepted Answer

While DIY kits exist at hardware stores, they are water-based and typically 40 to 60% solids, far inferior to professional 100% solids systems. DIY epoxy often peels within 1 to 2 years due to poor surface preparation and thin application.

Question 12

What is the difference between epoxy paint and epoxy coating?

Accepted Answer

Epoxy paint is a single-component latex paint with a small amount of epoxy added. True epoxy coating is a two-component system (resin + hardener) that chemically bonds to concrete. The coating is 5 to 10x more durable.

Question 13

Does epoxy flooring increase home value?

Accepted Answer

It helps. A finished garage floor is one of the first things a buyer notices, and a professionally installed epoxy floor reads as a maintained house rather than a bare slab. It also cleans up in minutes instead of staining.

Question 14

Can epoxy be applied to wood or tile?

Accepted Answer

Epoxy is specifically engineered for concrete substrates. While specialty adhesion primers exist for other surfaces, we recommend concrete for optimal bonding and long-term performance.

Question 15

What happens if my concrete has cracks?

Accepted Answer

We repair cracks during surface preparation using epoxy filler and/or polyurea crack repair. Small cracks are cosmetic; structural cracks may telegraph through but won't affect coating adhesion.

Question 16

Is epoxy heat resistant?

Accepted Answer

Standard epoxy systems withstand temperatures up to 200°F. For environments with extreme heat (near ovens, welding areas), we use specialized high-temperature epoxy systems rated up to 500°F.

Question 17

Can you add logos or designs to epoxy floors?

Accepted Answer

Absolutely. We can embed custom logos, company branding, safety markings, lane striping, or decorative patterns into the epoxy system. This is popular for showrooms, gyms, and commercial spaces.

Question 18

How soon can I walk on a new epoxy floor?

Accepted Answer

Light foot traffic is typically safe after 18 to 24 hours. Full cure for vehicle traffic is 72 hours for epoxy systems, and as fast as 24 hours for polyaspartic systems.

Question 19

Does epoxy yellow over time?

Accepted Answer

Some epoxy resins can amber or yellow with UV exposure. That's why we apply a UV-stable polyaspartic or polyurethane topcoat on all floors exposed to sunlight, preventing any yellowing.

Question 20

What is a moisture test and why does it matter?

Accepted Answer

Before installation, we test your concrete's moisture vapor emission rate. Excess moisture beneath the slab can cause epoxy to delaminate. If levels are high, we apply a moisture mitigation primer first.

Question 21

Can epoxy go over stained concrete?

Accepted Answer

Yes, but the stained surface must be mechanically profiled (diamond ground) to remove the stain and create a proper bonding surface. Chemical stains and sealers prevent epoxy adhesion if not removed.

Question 22

Is epoxy environmentally friendly?

Accepted Answer

Modern epoxy systems are low-VOC and solvent-free. Once cured, they are inert and non-toxic. The longevity of epoxy (15 to 20+ years) also reduces the environmental impact of frequent floor replacements.

Question 23

What substrates can epoxy be applied to?

Accepted Answer

Epoxy is designed for concrete and cementitious substrates. It can also bond to properly prepared steel, aluminum, and masonry surfaces with appropriate primers.

Question 24

Do I need to seal my concrete before epoxy?

Accepted Answer

No. In fact, sealed concrete prevents epoxy adhesion. If your concrete has been previously sealed, we remove the sealer during diamond grinding to ensure a strong mechanical bond.

Question 25

What is the sheen level of epoxy flooring?

Accepted Answer

Standard epoxy finishes range from satin to high-gloss. Most clients prefer high-gloss for the mirror-like finish. We can also create matte or semi-gloss finishes upon request.

Question 26

How long does garage epoxy last?

Accepted Answer

A professionally installed 100% solids epoxy system with a polyaspartic topcoat will last 15 to 20+ years in a typical residential garage with normal use and basic maintenance.

Question 27

Will hot tires peel my garage epoxy?

Accepted Answer

Not with our system. Hot tire pickup is a common failure with cheap DIY kits. Our 100% solids epoxy with polyaspartic topcoat is engineered to resist hot tire transfer and will not peel or discolor.

Question 28

Can I park on my epoxy garage floor?

Accepted Answer

Absolutely, that's what it's designed for. After 72 hours of cure time (24 hours for polyaspartic), you can park cars, trucks, SUVs, and even heavy equipment on the floor.

Question 29

How do I clean my epoxy garage floor?

Accepted Answer

Simply sweep and mop with warm water and a mild detergent. For oil or chemical spills, clean up quickly with a degreaser. Avoid harsh acids or abrasive scrubbing. It's one of the easiest floors to maintain.

Question 30

What is the best epoxy system for a garage?

Accepted Answer

We recommend a 100% solids epoxy base coat with decorative flake broadcast and a polyaspartic topcoat. This combination delivers maximum durability, UV stability, chemical resistance, and a showroom-quality finish.

Question 31

How long does garage floor installation take?

Accepted Answer

Most residential garages (2 to 3 car) are completed in 1 to 2 days. Day 1: surface prep and base coat. Day 2: flake broadcast and topcoat. You can walk on it in 24 hours and park after 72 hours.

Question 32

Can epoxy hide cracks in my garage floor?

Accepted Answer

Epoxy fills and covers hairline cracks, making them invisible. Larger cracks are repaired with epoxy filler before coating. The finished floor looks seamless and brand new regardless of previous condition.

Question 33

What color flakes are available for garage floors?

Accepted Answer

We carry 40+ flake color blends, from classic neutral blends to bold custom combinations. Popular choices include saddle tan, midnight black, coastal blue, and granite gray. We bring samples to every estimate.

Question 34

Does garage epoxy resist oil and chemical spills?

Accepted Answer

Yes. Our epoxy systems are highly resistant to motor oil, gasoline, brake fluid, antifreeze, road salt, and household chemicals. Spills sit on the surface and wipe away easily.

Question 35

Can I still use my garage during installation?

Accepted Answer

We need the garage completely cleared for installation. Most installs take 1 to 2 days, plus 72 hours of cure time. We help coordinate timing so the disruption to your routine is minimal.

Question 36

Will the flakes in my garage floor come off?

Accepted Answer

No. Decorative flakes are broadcast into the wet epoxy and then sealed with a clear topcoat. They become permanently embedded in the system and will not come loose under normal use.

Question 37

Can I get a solid color garage floor instead of flakes?

Accepted Answer

Yes. We offer solid-color epoxy, metallic epoxy, quartz broadcast, and flake systems. Solid colors give a clean, modern look. Flakes are popular because they hide imperfections and add texture.

Question 38

Is a 1-car garage too small for epoxy?

Accepted Answer

Not at all. We coat garages of all sizes, from single-car garages to 4+ car garages and workshops. Smaller garages actually benefit the most because the floor transformation is so dramatic.

Question 39

Will my garage floor be ready for winter?

Accepted Answer

Yes. Once fully cured, epoxy is unaffected by temperature changes, road salt, snow melt, and freeze-thaw cycles. In fact, the sealed surface protects your concrete from winter damage.

Question 40

Do I need to move everything out of my garage?

Accepted Answer

Yes, the garage needs to be completely empty for installation. We can recommend local storage solutions or help you plan around a convenient time to clear the space.

Question 41

Can I install epoxy on a brand new garage floor?

Accepted Answer

New concrete must cure for a minimum of 28 days before epoxy application. We test moisture levels to confirm the slab is ready. Applying too early can cause adhesion failure.

Question 42

What if my garage floor has been previously coated?

Accepted Answer

We diamond grind to remove all existing coatings, paints, or sealers down to bare concrete. This ensures our system bonds directly to the concrete for maximum adhesion and longevity.

Question 43

Does garage epoxy work in extreme Texas heat?

Accepted Answer

Absolutely. Our systems are tested for Texas climate conditions. The polyaspartic topcoat is UV-stable and heat-resistant, performing perfectly even in garage temperatures exceeding 120°F in summer.

Question 44

Can I use a floor jack on epoxy?

Accepted Answer

Yes, but always use a rubber pad or mat under the jack to prevent point-load damage. Our coatings handle heavy loads well, but concentrated pressure from bare metal can dent any floor coating.

Question 45

How do I prepare for my garage floor installation?

Accepted Answer

Clear the garage completely, ensure power is available, and plan for 72 hours of no vehicle access. We handle all surface preparation, that's included in our service.

Question 46

Can you coat the garage steps and curb too?

Accepted Answer

Yes. We coat steps, curbs, utility room thresholds, and transition areas for a seamless, finished look throughout the entire space.

Question 47

What if it rains during my garage installation?

Accepted Answer

Rain doesn't affect garage installations since the work is done indoors. Humidity can affect cure times, but our polyaspartic systems are moisture-tolerant and cure reliably in any weather.

Question 48

Is a full-flake broadcast better than partial?

Accepted Answer

Full-flake (also called full-chip broadcast) covers 100% of the surface for maximum texture, slip resistance, and hiding power. Partial broadcast shows more of the base coat color. Both are excellent options.

Question 49

Will epoxy fix my pitting garage floor?

Accepted Answer

Minor pitting is filled during application. Severely pitted floors may need a self-leveling epoxy base to create a smooth, even surface before the decorative system is applied.

Question 50

Can I add a drainage slope to my garage epoxy?

Accepted Answer

Epoxy follows the existing contour of your concrete. We cannot create slopes, but we can work with existing drainage patterns and ensure coatings do not impede water flow.

Question 51

What commercial spaces benefit from epoxy?

Accepted Answer

Retail stores, restaurants, offices, showrooms, medical facilities, salons, gyms, auto dealerships, breweries, and more. Any commercial space that needs a durable, attractive, easy-to-maintain floor.

Question 52

Can epoxy be installed in a working business?

Accepted Answer

Yes. We work around your business hours, evenings, weekends, and overnight shifts. We section off areas to minimize disruption and can complete most commercial projects in phases.

Question 53

How long does a commercial epoxy floor last?

Accepted Answer

Commercial epoxy systems typically last 10 to 20 years depending on traffic levels and maintenance. High-traffic retail may need recoating sooner, while office floors can last 20+ years.

Question 54

Is epoxy flooring ADA compliant?

Accepted Answer

Yes. Our commercial systems meet ADA requirements for slip resistance. We add anti-slip aggregate to achieve the required coefficient of friction for public spaces.

Question 55

Can I get my company logo embedded in the floor?

Accepted Answer

Absolutely. We install custom logos, branding, directional signage, and decorative patterns into commercial epoxy floors. This is especially popular for showrooms, lobbies, and retail spaces.

Question 56

Does commercial epoxy meet health code requirements?

Accepted Answer

Yes. Our seamless epoxy systems meet FDA, USDA, and local health department requirements for food service and healthcare environments. The non-porous surface prevents bacteria growth.

Question 57

How do I maintain a commercial epoxy floor?

Accepted Answer

Daily sweeping and weekly wet mopping with a neutral pH cleaner. For high-traffic areas, we recommend an auto-scrubber. No waxing, polishing, or special treatments are needed.

Question 58

Can epoxy handle restaurant kitchen traffic?

Accepted Answer

Yes. We install heavy-duty epoxy and urethane cement systems specifically for commercial kitchens. These resist grease, thermal shock from hot liquids, and heavy foot traffic.

Question 59

What is the minimum square footage for commercial jobs?

Accepted Answer

We have no minimum, but our typical commercial projects range from 500 to 50,000+ square feet. Pricing scales favorably for larger projects.

Question 60

Can you add safety markings and lane striping?

Accepted Answer

Yes. We install OSHA-compliant safety markings, pedestrian lanes, forklift paths, color-coded zones, and hazard striping as part of the epoxy system.

Question 61

How much downtime will my business have?

Accepted Answer

Most commercial projects are completed in 2 to 5 days depending on size. With polyaspartic systems, we can coat and return to service in as little as 24 hours.

Question 62

Is commercial epoxy fire resistant?

Accepted Answer

Cured epoxy is self-extinguishing and does not support combustion. For environments requiring specific fire ratings, we offer fire-rated coating systems that meet building code requirements.

Question 63

Can epoxy floors reduce lighting costs?

Accepted Answer

Yes. High-gloss epoxy floors reflect up to 300% more light than bare concrete, significantly improving ambient lighting and potentially reducing the number of light fixtures needed.

Question 64

Do you offer commercial floor maintenance plans?

Accepted Answer

Yes. We provide annual inspection and maintenance programs for commercial clients, including deep cleaning, spot repair, and protective recoating to extend the life of your floor investment.

EPOXY FLOORING FAQ

STILL HAVE QUESTIONS?

READY FOR DALLAS'S BEST EPOXY FLOOR?